Heavies +12mm Incinerated Heavies

The material being the sinks from floatation of Incinerator Non-Ferrous.

The material is screened to remove -12mm particles, the upper size is around 70-80mm although the occasional oversize piece may also be present. The majority of the material is within the 12-40mm size range.

The material will go dull as it dries as shown in the bottom two photos, however spraying lightly with water will bring back the colours.

Heavies Copper/Brass Mix Heavies 12mm+

The material being the sinks from floatation of incinerator non-ferrous after sensor sorting by colour.

The material is screened by trommel to remove the majority of –12mm particles, the upper size is around 70-80mm although the occasional oversize piece may also be present. The majority of the material is within the 12-40mm size range.

The material will go dull as it dries as shown in the last three photos, however spraying lightly with water will bring back the colours.

Heavies Grey Mix Heavies +12mm

The material being the sinks from floatation of incinerator non-ferrous after sensor sorting by colour.

The material is screened by trommel to remove the majority of –12mm particles, the upper size is around 70-80mm although the occasional oversize piece may also be present. The majority of the material is within the 12-40mm size range.

Heavies Incinerator Grade Heavies 4-12mm

The material being the sinks from floatation of Incinerator Non-Ferrous.

The material is screened to remove +12mm particles.

Heavies Incinerator Grade Heavies 1-4mm

The material being the sinks from floatation of Incinerator Non-Ferrous.

The material is screened to remove +4mm particles.

  Watch our video

   Contact us to find out more and book in a trial load in for our process.